TANDEM solo From Kessebohmer

New products on Interzum

Benefits at a glance  

TANDEM solo             

  • One-handed opening for a complete overview of tall cabinet contents           
  • Optimal use of storage space thanks to height- adjustable trays
  • New, user-friendly, opening damping
  • Improved running properties for the TANDEM solo and design revised at certain points
  • Trays ready for ARENA select with Rockenhausen wooden frames
  • New look with a new colour  ̶  anthracite
  • Very attractive price/performance ratio for a large pull-out unit, without the additional door storage provided by a TANDEM

 

Entry-level storage fitting with basic functionality            

1. Why this product?                                                       

  • The TANDEM Solo storage fitting for 450 to 600 mm wide cabinets offers many convenience features at an entry-level price, including optimal use of space, a clear overview and easy access.
  • Typical Kesseböhmer features  ̶ transparency, height-adjustable storage levels, easy access, functionality over the whole cabinet height and good load capacity  ̶  are on offer here too.

 

Expanded portfolio of storage pull-outs

1. Why this product?   

  • For 300 – 450 mm cabinet widths DISPENSA larder units are still the best solution     
  • TANDEM solo is an attractive and lower-cost solution for 450 – 600 mm widths
  • The TANDEM itself offers even more comfort for 450 – 600 mm widths;it is our high-end storage fitting for this segment. 

                    

 

Market situation today   

1. Why this product?             

  • Today's customers expect more from a basic storage unit      
  • This has required continuous further development of the TANDEM solo
  • We have improved not only runner action but also user-friendliness and design
  •  At the same time, kitchen manufacturers are putting a higher priority on distinctiveness and differentiation

 

 

Perfect and flexible storage solutions   

2. Product concept                                                     

  • Single-handed opening for a perfect overview of cabinet contents  
  • Optimal use of space thanks to height-adjustable trays
  • New: TANDEM solo now available in anthracite

 

 

 

New opening damping    

3. Technical details             

  • The new damper from now on comes as a standard with every TANDEM solo
  • The opening movement is slowed over the last 80 mm
  • Damper familiar from Magic Corner

 

 

  • Once the necessary locating holes have been added to the runner, the connecting plate can be positioned and screwed to the carcase bottom panel alongside the TANDEM solo runner. The damper itself is clipped to this connector plate
  • As standard, each frame is fitted with the activator plate

 

 

 

New design

3. Technical details        

  • The new-look crosspiece for the top runner features a puristic, harmonious design   
  • It no longer requires a plastic cap
  • The assembly method for the fixed crosspiece remains the same
  • No variable crosspiece

 

 

  • New control levers in chrome complete the distinctive, high-quality look     
  • The new control levers will be standard components from series prodution
  • A mixed installation using the previous control levers is not possible

               

 

Improved runner properties

3. Technical details

  • New rubber pads on the control arms improve runner properties by reducing noise

            

 

Assembly

4. Assembly          

  • New number for assembly instructions
  • Assembly concept for the new crosspiece for 16 mm side panel thickness
  • Assembly concept for the new crosspiece for 19 mm side panel thickness
  • Assembly concept for the damper
  • Assembly for the new control lever

 

 

Assembly concept for crosspiece

4. Assembly     

  • Assembly concept for the fixed crosspiece for 16 cm carcase side panel thickness stays the same = screwed directly to carcase side
  • The drilling pattern stays the same 

 

 

Assembly concept for crosspiece    

4. Assembly      

  • Assembly concept for the new crosspiece for 19 mm side panel thickness indirect screwing in the side panel
  • To compensate for side panel thicknesses <19 mm, mounting plates must be placed underneath
  • For 16 mm sides, 2 mounting plates à 1.5 mm for 17,18 mm sides, 1 mounting plate of 1.5 mm.

               

 

Assembly concept for damper

4. Assembly       

  • Assembly concept for the new opening damper
  • The runner must have the new locating holes

 

 

 

 

Assembly concept for damper

4. Assembly

 

 

Assembly concept control lever

4. Assembly

  • Assembly of the new chrome-plated control lever is the same as before

    

 

Summing up                                     

5. Comparison with the competition           

  • More higher grade features
  • Standard damping
  • Very easy assembly
  • Fast assembly
  • Suitable for industrial assembly
  • Highest load capacity
  • Newest design

 

Tandem Solo

Download TANDEM solo press release as a PDF File

Download TANDEM solo (1,39 MB, PDF)